USD
Your position: Home > CNC Accessories
- Description
Servo Thread Inspection Machine SF001
Thread testing machine Manual
3. The black STOP button on the right can be turned on or off, and the rotation speed can be adjusted by twisting or twisting
Note: If you want to change the reversal time, you must hold down the "Mode Save" button in the "Stop" state for 3 seconds and then hold down again for 5 seconds to enter the programming interface.Press the red down key, find "07 delay "and move the toggle cursor to change "07 delay".For example, "001500" means that after the baffle touches the sensor, the motor reversal time is 1.5 seconds.07 delay "The larger the number, the longer the reversal time, and the shorter the reverse, the adjustment of the depth of screw screwing can be completed."
Thread testing machine Manual
3. The black STOP button on the right can be turned on or off, and the rotation speed can be adjusted by twisting or twisting
Note: If you want to change the reversal time, you must hold down the "Mode Save" button in the "Stop" state for 3 seconds and then hold down again for 5 seconds to enter the programming interface.Press the red down key, find "07 delay "and move the toggle cursor to change "07 delay".For example, "001500" means that after the baffle touches the sensor, the motor reversal time is 1.5 seconds.07 delay "The larger the number, the longer the reversal time, and the shorter the reverse, the adjustment of the depth of screw screwing can be completed."
You May Like
-
$149.00
-
$199.00
-
$99.00
-
$99.00
-
$133.00
-
$149.00
-
$149.00
-
$10.00
-
$10.00
