No.1GSK980TDi CNC system is used for the transformation of C6180 * 1500 ordinary lathe CNC special machine

The outer circle of the mold is indexed and milled, and the milling angle needs to be adjusted;
Use the old machine C6180 * 1500 ordinary car to carry out numerical control transformation.


solution

The machine tool grinding rail is sticked with plastic shovel to restore geometric accuracy;
X / Z axis modified ball screw feed mechanism;
The main shaft is replaced with a servo motor, a reducer is added, and the modified synchronous belt is directly connected to the main shaft;
Install electric spindle, make bracket and manual angle adjustment;
Configure GSK980TDi CNC system.




Application effect


Meet customer's workpiece processing needs;
Replacing the original imported vertical car processing, greatly saving the cost of equipment.







No. 2 GSK980TDi CNC system is used for the CNC transformation of CY6140-1500 ordinary lathes


The idle ordinary lathes are numerically transformed, and the machine tools are fully protected to meet the requirements of parts processing.



solution

Remove the original machine tool feed box, slide box, X axis screw, etc., and reinstall the X / Z axis as the ball screw feed mechanism;
Quench and grind the machine tool guide rails and restore the geometric accuracy with plastic shovel scraping, making it suitable for long-term high-speed operation of CNC machine tools;
Equipped with GSK980TDi numerical control system and equipped with electric four-station tool post;
Redesign and install the whole machine for full protection.




Application effect


Satisfy customer parts processing requirements;
The machine tool protection design is reasonable and beautiful.






No. 3 GSK980TDi CNC system is used to purchase new machine CK46P function configuration retrofit




Purchase a new machine for arranging cutters, the workpiece needs to be processed by turning, milling and drilling once;
Small batch production of workpieces requires automatic feeding and automatic receiving.

solution


Configure GSK980TDi CNC system;
Install double head with Y-axis power head and six-station hydraulic tool holder;
The original triangle belt drive of the main shaft is changed to synchronous belt drive, and the main shaft disc brake is installed;
Install a feeder and automatic material receiving device.




Application effect


Meet the customer's requirement of one-piece clamping processing and precision of turning, milling and drilling;
Meet the functions of automatic feeding and automatic receiving.