- Description
Production lead time: 15 days
If need wire transfer or any question please contact paycnc@paycnc.com
Product parameters
Input |
AC (0.85~1.1)220V 50 Hz /60Hz 10A(Max) |
Output phase current |
The effective value of phase current is not greater than 6.8A |
Adaptive motor |
Three-phase hybrid stepper motor (step Angle 0.6°) |
Working environment |
0 ° C to 45 ° C 10% to 85%RH (no condensation). No corrosive, flammable, |
Storage environment |
-20℃ to 80℃ 10% to 85%RH (no condensation) |
Driving mode |
SPWM (sinusoidal pulse width modulation) constant current chopper, three-phase |
Step Angle |
Can be set by the user: 0.030°, 0.036°, 0.045°, 0.060°, 0.072°, 0.075°, 0.090°, |
Corresponding motor |
12000、10000、8000、6000、5000、4800、4000、3000、2500 |
Step Angle |
DIP switch (SW7, SW8, SW9, SW10) setting; |
Input signal |
CP/ (pulse); DIR/ (direction); EN/ (Enable); |
Input level |
At 5V and 5 mA to 10mA, run a 1kΩ resistor at 12V and a 2.2 kω resistor at 24V. |
Position pulse |
Single pulse mode: CP (pulse) +DIR (direction) |
Input mode |
Pulse width ≥2μs; |
Output signal |
RDY1/RDY2 (ready) : connected when no alarm, load 30V, 0.5A (Max). |
Power-off phase memory |
After the drive power off, the current phase will be automatically remembered; |
Motor current automatic halving function |
When it is set to ON, the drive unit works in up-frequency and up-current mode, |
Protection function |
Brake abnormal, undervoltage, overpressure, IPM module abnormal. |
Status indication |
Green LED RDY: normal indication, bright when no fault; |
Overall dimension |
244 mm×163 mm×92mm |
weight |
2.7kg |
Product installation dimensions