KND BD3D-C Stepper Drive
Paycnc.com - PAY for CNC components
Your position: Home > Stepper Drive

KND BD3H-C Stepper Drive

BD3D-C Stepper Drive from Beijing KND CNC Technique Co. Ltd.
Item Code: BD3D-C
Market Price:
USD $362.00
Price:
USD
$329.00
Save $33.00(9% Off)
PDF Format
Shipping Cost:
to
Delivery:
Estimated between
Units
  • Description
BD3D-C Stepper Drive from Beijing KND CNC Technique Co. Ltd.
Production lead time: 15 days

If need wire transfer or any question please contact paycnc@paycnc.com
 
Power
Supply
AC220V  -15%  +10%   50/60HZ  12 A(MAX)
Motor Phase
Current
1.0A  to  6.8A
Applicable
Motor Type
Three-Phase Hybrid Stepper Motor
Operating
Conditions
Ambient temperature: 0 to 50
Ambient humidity: 15 to 85%RH . (No condensation)
Free of corrosive or explosive gases
Free of exposure to water, oil or chemicals
Free of dust, salts or iron dust
Storage
Conditions
Ambient temperature:-25 to 70
Ambient humidity: 15 to 85% RH. (No condensation)
Control Method Full-wave rectification PWM
Sine-wave driven
Drive
resolution
0.03° 0.036° 0.045° 0.06° 0.072° 0.09° 0.12° 0.18°
Steps / rev 12000   10000 8000 6000 5000 4000 3000 2000
Step Setting Stepper 1  by  Switch 1(SW16,7,8)
Stepper 2  by  Switch 2(SW26,7,8)
Input Signals CP+/CP-;DIR+/DIR-
Input Level 5V, 5 to 10mA,
Use 1K Ω cascade resistor when input level is 12 V,
Use 2.2K Ω cascade resistor when input level is 24 V,
The input circuit takes effect when input current is not zero
Pulse Input
Mode
Single-Pulse Mode:CP(Pulse)+ DIR(Direction)
Pulse Width≥2.5µS; Pulse Frequency ≤ 200KHZ(10000 steps/rev)
Output Signals RDY1/RDY2(Ready): Normally Open Contact;
Put through when there is no fault;
Max. load: 30V, 0.5A
LED Status
Indicators
Green LED  RDY: Normal, Without Faults
Red LED  ALM1: Overcurrent; ALM2: Overtemperature
ALM3: Overvoltage; ALM4: Undervoltage
Dimensions 213×115×175mm
Weight kg

TOP
Message Us